Opt Weight
20.670 Kg
Capacity
0

Specification

DESCRIPTIONDETAILS
Cabin, glasses & related
Door, lock, window & sealing
Operator seat, bracket & arm rest
Travel lever & linkage
Joystic, boot
Wiper blade, motor
Floor mate
DESCRIPTIONDETAILS
Fuel tank, cap & valve drain
Hoses (tank to water sparator) & gasket
Hoses water sparator to feed pump
Water sparator racor bolt joint & gasket
Fuel filter, hoses, bolt joint, bleed plug
FIP/supply pump case, flyweight & governor
Feed pump, priming pump, screen
FIP/supply pump tube, bolt & clamp
Nozzle/injector spill hose & gasket
Nozzle/injector & mounting
DESCRIPTIONDETAILS
Oil filter, hose & bracket
Turbo hose/piping lube & clamp
FIP oil piping & gasket
Rocker arm cover, refill cap, bolt & gasket
Front cover & FIP drive shaft seal
Oil pan & drain plug
Cam shaft cover, breather & deept stick
Oil cooler, bolt & drain valve
Cylinder head, plug & gasket
Turbo charger piping & bolt
DESCRIPTIONDETAILS
Radiator fin, rubber & sealing
Radiator cap, pressure valve, hose
Reservoir tank, hose & bracket
Corrotion resistor & hose
Hose, piping & clamp
Water pump & bleeding valve
Cooling fan & mounting
V-belt set, adjuster plate & pulley
DESCRIPTIONDETAILS
Air cleaner element (inner/outer)
Dust evacuator valve
Dust indicator & connection (sensor)
Ejector pipe, bolt, valve & clamp
Turbo charger, bolt & hoses
Intake manifold & gasket
After cooler & hose
Exhaust manifold, bolt & gasket
Mufler, exhaust pipe, bolt & clamp
DESCRIPTIONDETAILS
Engine mounting bolt & rubber
Fan guard & bolt
Vibration damper, pointer
PTO/damper
FIP linkage, bolt joint & bearing
DESCRIPTIONDETAILS
Hyd. tank, cap, return hose & breather
Oil cooler & line
Blade lift line (C/V ke cylinder)
Blade tilt line (C/V ke cylinder)
Ripper line (C/V ke cylinder)
DESCRIPTIONDETAILS
PPC valve, actuator hose & mount
Blade holding valve, piping & hose
Control valve, pilot hose/linkage, piping & mount
DESCRIPTIONDETAILS
Hydraulic pump case, plug & mount
Steering pump, relief valve, plug & mount
Transmission pump, relief valve, plug & mount
Suction hose, return hose
DESCRIPTIONDETAILS
Lift cyl, pin, bushing, shim
Tilt cyl, pin, bushing, shim
Ripper cyl, pin, bushing & shim
Blade
Ripper shank
C frame/straight
Bracket ripper
DESCRIPTIONDETAILS
Track link, bushing, link
Track roller, seal, guard & bolt
Idler, seal, bracket, cover & bolt
Track shoes & bolt
Track adjuster & track tension
Carrier roller, seal, bolt & support
Wear guard & mounting
DESCRIPTIONDETAILS
Segment & mounting
Drain plug, fill plug
Final drive mounting bolt
DESCRIPTIONDETAILS
Under cover
Hand rail RH
Side RH
Side LH
DESCRIPTIONDETAILS
Footh step RH & LH
Control valve, pump, radiator cover & bolt
Engine hood, lock & mount
Box battery, lock, cover, foot step & mounting
Side cover RH & mounting
Side cover LH & mounting
DESCRIPTIONDETAILS
Cabin side & mounting
Canopy side & mounting
Side RH & mounting
Side LH & mounting
DESCRIPTIONDETAILS
Alternator, mounting & wire
Oil level sensor & wire
Starting motor, safety relay & wire
Ribbon heater, heater relay & wire
Oil pressure switch & wire
Engine control modul
Cooling temp. sensor & wire
DESCRIPTIONDETAILS
Battery, terminal & wire
Baterry relay, mounting & wire
Work lamp & wire
Main wiring harness
DESCRIPTIONDETAILS
Starting switch & key
Buzzer cancel & lamp switch
Radio, antene & HM
Fuel control
Controller komtrax
Antena komtrax, radio, wire
Horn
General Information
The Komatsu D85ESS-2 is a straight-tilt type crawler dozer with an operating weight of 21 tons that can be used in virtually any application, including construction, mining and forestry. It can also be used with a towing winch for mining and logging operations. Engine Power The D85ESS-2 is equipped with a reliable S6D125E-2 turbocharged diesel engine, 161 kW power and 215 HP. Recognized as “Advance Skidder”, this product provides an extraordinary strength of weight ratio for greater productivity. Operator Convenience D85ESS-2 features with a logging spec canopy to ensure a comfortable and safe working environment. The left joystick controls the steering or turning and speed control. The operator can also control the machine naturally because the machine is able to respond quickly to the movement of the left control lever. The right joystick is equipped with OLSS (Open Center Load Sensing System) for precise blade control. High Productivity The combination of large blade capacity with high traction strength will result superior dozing performance. The new towing winch design features more height and greater line pull, with single lever control to significantly increase productivity and shorten winching times.

Komatsu Bulldozer D85ESS-2

231 views - Last Seen 04/30/2024 13:52


  • item number294
  • serial numberNEW
  • year2022
Rent Price
Rent price will be calculated automatically based on the chosen rent period.
Prices listed are estimates. The rental price is calculated automatically based on the rental period.
MonthlyRp 210,000,000
DailyRp 6,300,000
HourlyRp 525,000
Rental Availability
Start DateSun, 08 January 2023
End DateSun, 31 December 2023

Product Quality Index

5
Stars

Hour meter

0

Insurance Ready

0 Voucher available to use

Scanina
Chat
Customer Reviews
0
Based on
0 Reviews
5
0
4
0
3
0
2
0
1
0
Customers satisfied with
    Customers unsatisfied with